Luoyang Youhui Environmental Protection Equipment Co., Ltd.  

Product Name: Waste/Used Engine Oil Recycling Machine (YHE-26) Model NO.: YHE-26 Mechanical Principle: Vacuum Environment Protection Equipment: Waste Oil Regeneration Machine Trademark: YOUHUI Transport Package: Standard Export Package Origin: Luoyang, Henan HS Code: 8419409090 Product Description Specifications1. Used black motor oil suit2. High recycle rate3. High performance, and environment.4With low noise oil pump, off gas system1. Technological Instruction:Adopting ways of transportation by tins or buckets, the waste mineral oil are unloaded intoFiltering ponds directly. After the process of sedimentation and filter, pumped the waste oil intoOil-water separator, then discharge the waste water and pump the isolated oil to tank separately.Through secondary filter, heat the oil up to certain temperature, feed it continuously flow to vacuumFilm evaporator, further desorbs the water in the waste mineral oil to isolate the clean oil and heavy oil.Then start the secondary filtration in molecular distillers to distillate the lubricating oil with Siemens, PLC and color touch screen to control the whole process.After cooling in condensator and stand still in buffer tank, pump the end product into tank.2. Technological Parameter:A. Process many kinds of waste oil such as waste hydraulic oil, used oil, diesel oil and wasteGasoline etcB. Distillation under high vacuum low temperature will not destroy the quality of the waste oil whichIs good for recycle.3. End product after regeneration:A. Clean and bright, moisture content less than 100PPM, separation degree of the heavy and clean oil is more than 90%B. The quality of the heavy and clean oil achieves or exceeds the new oil.C. Recycle rate achieve more than 80%4. Equipment Configuration:A. Not fussy about the waste oil, it can recycle the waste oil no matter what condition it is.Used Oil Recycling machine (Turnkey Plant)1. Purify the used machinery oil, hydraulic oil, compressor oil, motor oil, mediate-load gear oil, cooler oil, steel rolling oil, quench oil, flash swift quench oil, etc. In mine, metallurgical industry, machinery, chemical industry, rubber industry, instrument, traffic, petroleum drilling and exploring, construction ceramics, precision pressure casting, etc.2. The viscosity is less than 500CST and flash point is higher than 900° C3. The process is carried out by PLC with intelligent inspection and automatic control.Moisture content10PPM Mechanical impurities‹0.022%Pollution Degree‹NAS9Be compare with new oil, viscosity change rate‹+5%Filter accuracy3 micronEfficiency95%Installed power17KWRegenerated oil quantity800-1000KG/8H.